Removing rear wheel
9
112
Press brake caliper 1 against
brake disk 2.
Brake pistons are pressed
z
back.
Remove screw 1 and take
speed sensor out of bore.
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
OE
with center stand
Place motorcycle on center
stand, ensuring that it is rest-
ing on a firm and level support
surface.
Remove axle nut 2 with
washer.
Loosen lock nuts 3 on left and
right.
Loosen adjusting screws 4 on
left and right.
Remove adjusting plate 5 and
slide axle as far as possible to
left.