BMW F 800 GS Rider's Manual page 117

ATTENTION
Front wheel installed wrong
way round
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads of the
brake caliper on the left.
Raise the front wheel and in-
sert axle 4 until seated.
Tighten right axle clamping
screws 1 to the specified tight-
ening torque or install a suit-
able tool to counter-hold for
the next step in the assembly
procedure.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Install axle screw 2 and tighten
to the specified tightening
torque.
Axle screw in front quick-
release axle
30 Nm
Tighten left axle clamping
screws 3 to the specified
tightening torque.
9
115
z