Program Your Remote Access Code - Casio PhoneMate TA-150 Owner's Manual

REMOTE OPERATION
You can use Remote Operation from most
touchtone or cellular phones to retrieve,
replay, erase and save messages.
PROGRAM YOUR
REMOTE ACCESS CODE
The TA-150 is shipped with the code set to 1-2-
3. To change your 3-DIGIT REMOTE ACCESS
CODE:
1
CODE SET
Press
current 3-digit code will appear in the
display and you will hear:
CODE SET
2
SKIP REPEAT
Press or
first digit of the access code.
GREETING 1
6 23
3 Once a number is selected, press
CODE SET
to confirm the entry of the
first digit.
4
CODE SET
Press
. (Under the lid.) The
Set code
digit 1.
to select the
SKIP
again. You will hear:
Set code
digit 2.
5
SKIP REPEAT
Press or
second digit of the access code.
GREETING 1
6 43
Once a number is selected, press
6
CODE SET
to confirm the entry of the
second digit.
7
CODE SET
Press
8
SKIP REPEAT
Press or
third digit of the access code.
GREETING 1
6 48
9
CODE SET
Press
selected, to confirm the entry of the third
digit. Your newly programmed code will
be announced and appear in the LCD for
several seconds before resuming to
normal operation.
:
NOTE
If you call from a rotary, pulse or any non-touch-tone
telephone, use CASIO PHONEMATE's Touchtone Dialer.
The touchtone dialer is necessary to generate the tones
required by the TA-150 to remotely access your machine.
Use the accessory order form on page 35 to place an
order.
PAGE
25 25 25 25 25
to select the
again. You will hear:
Set code
digit 3.
to select the
, once a number is
648