Programming The Remote Access Code; Check Your Remote Access Code; Selecting Which Caller Id Records Are Saved; Turning Call Waiting Caller Id Off/On - Casio SI-460 User Manual

PROGRAMMING CALL WAITING AND CALLER ID

SELECTING WHICH CALLER ID RECORDS ARE SAVED

If you subscribe to any caller ID service, caller ID data will be displayed on the SI-460's LCD
when the call is received. The caller ID feature is factory pre-set to "ON" and "ANSWER" (all
answered calls will be recorded in the caller ID directory). The SI-460 can save the most recent
64 caller ID records.
1.
Press PROGRAM .
2.
3.
4.
Press the soft key under " " to
toggle between turning caller ID ON and
OFF.
5.

TURNING CALL WAITING CALLER ID OFF/ON

If you do not subscribe to a call waiting caller ID service, you can turn the SI-460's feature off.
It is factory preset to "ON."
1.
Press .
PROGRAM
2.
3.
6.
Press the soft key under "
toggle between " ," "
" ."
7.
When your selection appears in the
display, press PROGRAM to exit.
4.
Pressing " " toggles between "
and " ".
5.
Press PROGRAM to exit.
30

PROGRAMMING THE REMOTE ACCESS CODE

PROGRAMMING THE REMOTE ACCESS CODE
The remote access code is needed to access your voice mail from a remote location. The access
code is factory preset to "
1.
Press PROGRAM .
2.
3.
" to
" and
4.
5.

CHECK YOUR REMOTE ACCESS CODE

To check your station's remote access code,
1.
Follow steps 1-6 under "PROGRAMMING THE REMOTE ACCESS CODE" above.
2.
The current access number will appear in the display.
3.
Press PROGRAM to exit.
"
." To change your 3-digit remote access code,
6.
7.
8.
Enter three digits, using the keypad. As the
digits are entered, they will appear on the
display.
9.
10.
Press PROGRAM to exit.
31