Pyle PDMIC88ST User Manual

PDMIC88ST
Dynamic Microphone Kit
Pro Mic Kit with Microphone Stand, Carrying Bag, and Cable
Handling & Precautions
Covering and/or obstructing the microphone top mesh grill and
internal mic receiver diaphragm element will result in less than optimal
performance, causing audio distortion and interfered sound signal.
To avoid such audio interferences try decreasing the audio source's
volume, than position the microphone diaphragm so that it is not
directly pointed or exposed to the external audio source; allow su cient
separation distance between the microphone and external audio
source. The microphone internal system contains sensitive audio
equipment and electronic components, do not drip, hit or expose to
forceful impact. Do not store or operate the microphone in a high
temperature, or high humidity, environment.
Operation & Performance
The optimum placement distance of the microphone and vocals (distance from your
mouth to the microphone grill) is from 5 to 10 centimers. If the microphone placement
is too close to your mouth, the sound and audio pickup performance may be unclear,
outputting excessive bass and distortion in the audio tone.
Microphone Connection
Align the output connector with the slotted insert of the incoming connection cable
-- ensure the connector alignment is positioned properly and adequate pressure is
used when inserting the connection (you may hear a "click" sound to ensure proper
connection). To unplug the microphone, hold down the button lab, and ensure it is
depressed, then pull the connection cable outward gently.
www.PyleUSA.com