Section 7 − Installing Optional Magnifying Lens; Section 8 − Maintenance - Hobart Creator Series Owner's Manual

SECTION 7 − INSTALLING OPTIONAL MAGNIFYING LENS
NOTICE − Never use solvents or abrasive cleaning detergents.
NOTICE − Do not immerse the lens assembly in water.
The helmet requires little maintenance. However, for best performance clean
helmet after each use. Using a soft cloth dampened with a mild soap and water
solution, wipe the cover lenses clean. Allow to air dry. Occasionally, the filter
lens and sensors should be cleaned by gently wiping with a soft, dry cloth.
SECTION 8 − MAINTENANCE
1 Optional Magnifying Lens
Slide magnifying lens into the hel-
met retaining brackets as shown.
Align the magnifying lens with the
auto-darkening lens assembly.
.
1
To prevent lens fogging, install
flat side of magnifying lens to-
ward auto-darkening lens.
OM-281996 Page 13