Cropping An Image - Casio QV-R3 Recording Functions Manual

PLAYBACK

Cropping an Image

Use the following procedure when you want to crop a portion
of an enlarged image and use the remaining part of the im-
age as an e-mail attachment, Web page image, etc.
1.
In the Play Mode, use [ ] and [ ] to scroll
through images and display the one you want
to crop.
2.
Press MENU.
3.
Select the "PLAY"
tab, select "Trim-
ming," and then
press [ ].
4.
Shift the zoom controller towards
the size of the boundary on the monitor
screen.
• The size of the cropping boundary depends on the
size of the image on the display.
5.
Use [ ], [ ], [ ], and [ ] to move the cropping
boundary up, down, left, or right until the area
of the image you want to extract is within the
boundary.
6.
Press SET to extract the part of the image en-
closed in the cropping boundary.
• If you want to cancel the procedure at any point, press
MENU.
IMPORTANT!
• The cropped version of the image is saved as a new
file.
• The original, pre-cropped image is also retained in
memory.
• A Movie Mode image cannot be cropped.
• If the message "The function is not supported for this
file." appears, it means that the current image cannot
be cropped.
• The cropping operation cannot be performed if there is
to expand
not enough memory to store the cropped image.
85