Nautilus Hyosung MONISAFE400A Operator's Manual
  1. Manuals
  2. Brands
  3. Nautilus Hyosung Manuals
  4. Banknote Counter
  5. MONISAFE400A
  6. Operator's manual

Nautilus Hyosung MONISAFE400A Operator's Manual

400a system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator Manual
MONISAFE 400A System
V01.00.01 (2014.10.7)
© 2014 Nautilus Hyosung, Inc. All Rights Reserved.

Advertisement

Table of Contents
loading

Summary of Contents for Nautilus Hyosung MONISAFE400A

  • Page 1 Operator Manual MONISAFE 400A System V01.00.01 (2014.10.7) © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 2 Replaced Windows XP with Microsoft© Windows© Embedded V01.00.01 2014/10/07 POSReady 2009 © 2014 Nautilus Hyosung All Rights Reserved. The content of this specification is protected by copyright laws. 2013. 11. 08. 1st Release © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 3: Table Of Contents

    How to Remove the Bills from the Utility Cassette ·································································· 4-18 How to Open and Close the Upper Unit ··············································································· 4-20 How to Open and Close the Upper Body of the Machine ................4-23 How to Remove a Jam ..........................4-24 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 4: Chapter 1 Preface

    Support Information ▶ For question or if error occurs while operating the MONISAFE400A while following this manual, contact the NHA maintenance staff or help desk. For contact information, see your support email addresses and telephone numbers that are provided separately.

  • Page 5: Conventions

    Body Module-Up (Upper Body of the Module) Bill Recycle Machine Customer Service Module Deposit Cassette Recycle Cassette Reject Cassette Tape Escrow 5-10 Utility Cassette BATT S/W Battery Switch Camera Unit Control Electronics © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 6 Liquid Crystal Display Operation Panel for Customers to Operate OSD board On Screen Display Board Power Supply Panel Control Board Switch Sensor and Indications Unit Service Provider Text Terminal Unit (OPL or SPL) © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 7: Safety Precautions

    4. The equipment is to be secured to the building structure before operation 5. A security container shall be permitted to optionally be provided with a secondary lock, but improper use of the secondary lock feature will reduce the security level of the TCR. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 8 ▪ If the above-mentioned abnormalities occur, immediately turn off the power, unplug the equipment and contact the service center. ▪ If you ignore these symptoms, the equipment may catch on fire or cause electric shock. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 9: Related Documents

    Related Documents ▶ The following documents complement this one. ▪ Installation Manual ▪ Service Manual ▪ VDM Manual ▪ Error Code Manual Contact your NHA representative to obtain copies of these documents. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 10: Chapter 2 Introduction

    Operator Manual Chapter2. Introduction Chapter 2 Introduction Exterior Overview ► The following picture shows the front of the MONISAFE400A and its key units. Teller Hold Indicator Bill Recycle Teller Hold Indicator Machine Upper Front Door LCD for Customer Operation Stand-by...

  • Page 11: Interior Overview

    Chapter2. Introduction Operator Manual Interior Overview ► The MONISAFE400A consists of the safe where banknotes are stored and the upper body where the CE and the power supply are installed. The interior and key units are as follows. Upper Body of BRM <Note!>...

  • Page 12: Basic Features

    Operator Manual Chapter2. Introduction Basic Features ▶ Key features of MONISAFE400A are highlighted in the following list: Main Controller Intel ATOM N450 1.66Ghz Memory Up to 2GB 3.5”, 320GB SATA Type Microsoft© Windows© Operating System Embedded POSReady 2009 Graphic Embedded Gen3.5+GFX Core...
  • Page 13 Teller Hold Indicator Left, Right Door Sensor Safety 1EA Interface 2 USB, 2 Serial, 1 TCP/IP Temp, Vibration Sensor <Note!> * is the reference value when the bill thickness is 0.1mm [0.0039 inches]. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 14: Monisafe400A Devices

    ▪ Microsoft© Windows© Embedded POSReady 2009 ▪ Embedded Gen3.5+GFX Core (800X480) ▪ 2 PCI Slot ▪ 6 Serial Ports ▪ SATA, 2 Ports ▪ 4+4 USB Ports (USB 2.0) ▪ Gigabit LAN (On-Boarded) ▪ 12V Power (DC-DC) © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 15: Power Supply

    The power supply unit allows the user to turn on/off the system, enter power-failure mode, and perform other sequences. Main Power 100~127Vac ±10% / 13.5A Input Voltage / Current 200~240Vac ±10% / 6.5A Frequency 47~63Hz NORMAL:50/60Hz © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 16: Bill Recycle Machine (Brm)

    • Dispensing 200* bills per transaction by bundle (47.2mm [1.86inch]) • Depositing 200* bills per transaction by bundle (48mm [1.89inch]) *For 0.1mm [0.0039inch] thickness bill Upper Body of BRM Lower Body of BRM © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 17: Chapter 3 For The Beginning Operator

    Opening and Closing the Exterior Door ►The front body door of upper/lower can be opened independently of each other with the key. The security enclosure of the MONISAFE400A can be accessed after you open the lower front door. Opening & Closing the Upper Front Body ▶...

  • Page 18: Opening The Lower Front Body

    ▶ Close the upper & lower front body door as follows. 1. Insert the system key in the lower front body. 2. Turn the key clockwise and open the lower front body as pictured below. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 19: Opening The Security Enclosure

    2. Unlock the security door, refer to the relevant instructions detailed under “Opening/ Closing The Security Enclosure (Security Door)” for the configuration of MONISAFE400A 3. Turn and pull the Handle. Cencon Lock Handle © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 20: Closing The Security Enclosure

    1. Lock the security door, refer to the relevant instructions detailed under “Opening/ Closing The Security Enclosure (Security Door)” for the configuration of MONISAFE400A 2. Turn the Handle. 3. Close the lower front door. Cencon Lock Handle © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 21: Switching Power On/Off

    1. The system turning-on process is as follows. 2. Press the power switch at the left side (“ON”). 3. The system will be turn on automatically © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 22: Switching The Power Off

    3. The operating system will shut down then power will turn off. WARNING: DO NOT use the Main Switch on power supply when you would like to turn off the power. It may damage system or destabilize control electronics in TCR. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 23: Power Supply Status

    AC power is not supplied to the power supply unit and all status LEDs are turned off. ▪ In case power failure occurs during normal system operation, the system will enter <Power Failure Mode> and only [DC OUT] will be turned off. Main Switch © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 24: Opening/Closing The Security Enclosure (Security Door)

    Left (Counter Clockwise). The purpose is both to give the lock additional power and to ensure the lock bolt is fully extended. CW = Clockwise; CCW = Counter Clockwise © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 25 4. Turn the dial right (CW) until it stops. The lock’s bolt is now retracted and the lock is open. 5. Turn the handle to the left (CCW) and open the security door. © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 26 The best thing to do in analyzing the lock level is to write down the entire string and then pick out the portions of it that are significant to you, or if you are experiencing a problem with the lock, report the entire string to the Tech Support group. 3-10 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 27 Turn the dial to the left (CCW) until Error! Objects cannot be created from editing field codes. (the Change Key symbol along with Enter Combination) is displayed. 8. Error! Objects cannot be created from editing field codes.  Press #8  EcF © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 3-11...
  • Page 28 15. OPr  Retract Bolt Turn the Dial to the right (CW) to retract the bolt. 16. Close Door 17. Extend Bolt Turn the Dial to the left (CCW) to extend the bolt. 3-12 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 29: Chapter 4 Bill Recycling Machine 24 (Brm24)

    To perform these procedures, the safe use of equipment is required. Please refer to each system manual to safely access TCR. <BRM24 Overall Configuration Diagram> © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 30: Basic Specifications

    2. Injection of human: The operator takes out the RC from the equipment and replenishes RC with bills by hand. 3. Reference value when the thickness of bill used is 0.1mm (0.0039inch, US Dollar Brand New). © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 31: External Appearance Specification

    3.5 Kg (7.72Ib, except bill weight) Width: 217 ± 3 (mm) (8.54±0.118inch) Length: 140 ± 3 (mm) Dimensions Utility Cassette (5.51±0.118inch) (UTC) Height: 117 ± 3 (mm) (4.61±0.118inch) Weight 1.3 Kg (2.87Ib, except bill weight) © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 32: Bill Conditions

    2. Bill has sufficient life or sizing to be handled easily 3. Bill which can be manually held straightly when one end is held by a hand and the bill is slightly curved vertically © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 33 Chapter4. Bill Recycle Machine ▶Unacceptable condition 1. Bill having serious wrinkles, torn or broken section wherein paper fiber is broken and separation begins.  Wrinkle Wrinkle  Torn Torn  Broken section Broken Section © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 34 4. Bill ragged and cannot be held straightly when one end is supported by a hand 20mm (0.79inch) 35mm (1.38inch) When the bill is held by 20mm (0.79inch) and the straightness of the bill is 35mm (1.38inch) or less, it cannot be used © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 35 Operator Manual Chapter4. Bill Recycle Machine 5. Bill with cellophane tape, scotch tape, etc. Tape 6. Bill with folds Fold 7. Gradually curved bill (bills tied by hand seal, etc.) Band seal © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 36 Chapter4. Bill Recycle Machine Operator Manual 8. Bill with folded lines  Case 1  Case 2  Case 3 ☞ Bill distortion should not exceed 10 mm [0.39inch] © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 37: How To Open And Close The Lower Unit

    Then, pull the lower unit pressing lever A until the lower unit is completely taken out. (Lever A: Lower Unit Open Lever) 2. Lift up the Mid Transport Path pressing its handle B until it fixes. (Handle B: Middle Transport Path Open Handle) © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 38 E. (Lever E: Middle Transport Path Open Lever) 2. Push the lower unit into the BRM24 Frame until it locks into its position with a click as shown in Picture below. 4-10 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 39 (Lever F: Lower Unit Open Lever) ►How to Close the Lower Unit (Drawer) 1. Push the Drawer into the BRM24 Frame until it locks into its position as shown in picture below. © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-11...

  • Page 40: How To Replenish The Cassette With Bills

    (Handle C: Cassette Handle) 3. Unfold the holder of the cassette and lay it on the flat surface as shown in picture below. 4. Turn the key clockwise and open the cassette door. 4-12 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 41 7. Replenish the cassette with the bill to the position of the red label and push the Push-Plate to the end in the arrow direction pressing the green lever D. (Lever D: Cassette Push-Plate Lever) Label © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-13...
  • Page 42 Place the notes correctly. 8. Close the door with the key. After closing the door, remove the key from the cassette. (Please check that the top & bottom of door are completely locked.) 4-14 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 43 9. Fold the holder of the cassette and mount the cassette into the set guide. 10. Mount the lower unit into the BRM24 Frame. (Refer to “ Closing the Lower Unit”) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-15...
  • Page 44 3. Place the Cassette on the flat surface as the picture below. 4. For the procedures of replenishing the small-capacity cassette (RC31), please refer to 4) ~ 8) of the procedures described in “High-Capacity Cassette (RC30)” 4-16 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 45 5. Mount the cassette into the set guide. (Please check the direction of cassette entrance before mounting.) 6. Mount the lower unit into the BRM24 Frame. (Refer to “ Closing the Lower Unit”) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-17...

  • Page 46: How To Remove The Bills From The Utility Cassette

    ► To remove the bills from the Utility Cassette: 1. Turn the key clockwise to separate the Utility Cassette. 2. Pull the Utility Cassette holding the handle A to completely separate the Utility Cassette. 4-18 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 47 Remove the key after closing the door. 5. Mount the Utility Cassette and turn the key counterclockwise. Then completely inset the Utility Cassette into BRM24 as shown in picture below. © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-19...

  • Page 48: How To Open And Close The Upper Unit

    ► Closing the Customer Service Module 1. Hold the handle B with one hand and pull the safety lock C in the arrow direction with another hand to release the lock. (Handle B: Handle of CSM) 4-20 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 49 1. Hold the handle B with one hand and push the safety lock C in the arrow direction with another hand to release the lock. Slowly push the Tape Escrow in the arrow direction to completely close it. (Handle B: TE Handle) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-21...
  • Page 50 DO NOT take your hands off the handle until the upper unit is completely closed because the safety lock is released! And also, do hold the other places except the handle! 4-22 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 51: How To Open And Close The Upper Body Of The Machine

    (Lever A: Upper Unit Lock Lever) ► Close the upper body of BRM as follows. 1. Push the upper unit in the arrow direction as shown in picture until it is locked. © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-23...

  • Page 52: How To Remove A Jam

    (Knob A: CSM Shutter Knob) 2. Move the Push-Plate in the arrow direction by turning the green knob B clockwise for the jammed bill to be shown. (Knob B: CSM Push-Plate Knob) 4-24 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 53 3. Turn the knob C clockwise and completely remove the jammed bill. (Knob C: Knob for CSM Jam Removal) 4. After removing the jammed bill, turn the knob A clockwise and close the door. (Knob A: CSM Shutter Knob) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-25...
  • Page 54 3. Turn the green knob C clockwise for the bill to be shown and remove the jammed bill with another hand. (Knob C: Knob for Front Transport Path Jam Removal) 4. After removing the jammed bill, close the upper unit. (Refer to “Closing Upper Unit” ) 4-26 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 55 3. While still holding the lever, turn the green knob B clockwise and the jammed bill inside BC appears along the transport path. At this time, remove the jammed bill. (Knob B: Knob for BC Jam Removal) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-27...
  • Page 56 2. Turn the green knob A clockwise for the jammed bill to be shown and remove the jammed bill while holding the transport guide (B). (Knob A: Knob for Transport Path Jam Removal) 3. After removing jam, close Customer Service Module and Tape Escrow. 4-28 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 57 (The function of jam removal using button is optional.) 3. If the jammed bill is remained in Tape Escrow, open Customer Service Module and Tape Escrow. (Refer to “ Opening the Customer Service Module” and “ Opening Tape Escrow”) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-29...
  • Page 58 6. Do not remove a normal bill wound around the drum because it is returned during BRM initialization. 7. After removing jam, close Customer Service Module and Tape Escrow. (Refer to “Closing the Customer Service Module” and “ Closing Tape Escrow”) 4-30 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 59 (Knob A: MID Transport Knob) 4. Mount the lower unit into system. (Refer to Closing the Lower Unit (MID)) © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-31...
  • Page 60 (Knob D: Center Transport Knob) 2. Remove the cassette from both sides and press the Lever B. (Lever B: Center Transport Lock Lever) 3. Press the Lever in arrow direction and remove the bill. 4-32 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 61 4. Turn the knob from bottom to top until the jammed bill appears. Then remove the jammed bill. After removing the jammed bill, return the Push-Plate to the original position as shown in picture below. © 2014 Nautilus Hyosung, Inc. All Rights Reserved. 4-33...
  • Page 62 Utility Cassette and remove the jammed bills. (Knob A: Knob for Transport Path Jam Removal) 3. Close the door of Utility Cassette with key. Then remove the key from the cassette. 4-34 © 2014 Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 63 Operator Manual Notes Notes © Nautilus Hyosung, Inc. All Rights Reserved. Notes-1...

Table of Contents