Canon PC140 Operator's Manual page 41

Position the original to be copied in black
on the platen glass. Then make a copy.
(See "Normal Copying", on p. 30.)
Remove the black cartridge from the
copier and replace it with the blue one.
(See "Replacing Cartridges", on p.21.)
When the top cover of the copier is
opened, the power will automatically turn
OFF.
After inserting the blue cartridge, close
the top cover and return the platen to the
center position. Then turn the power
switch ON.
02/ PC140-USA
Position the original to be copied in blue
on the platen glass in the same position
that was used to copy the black original.
Insert the black copy into the multi-stack
tray as shown. Make sure the copy paper
is facing the right direction. Then, press
the key.
39
NOTICE:
• When making color copies, lighten the exposure
manually to avoid the dark shading that often
appears when color copies are made in the auto
exposure mode.
10/10/03, 7:38 AM
2
39