Transporting The Copier; Carrying The Copier By The Carrying Handle - Canon PC140 Operator's Manual

Transporting Transporting
the Copier the Copier
Please observe the following
precautions when transporting
this copier.
1
• Before moving the copier, always
turn the power OFF and unplug
the copier from its power source.
• Before moving the copier, be sure
to disconnect the power cord
from the copier.
• If the copier will be subjected to
any vibrations (e.g., when
transporting long distances),
remove the cartridge from the
copier.
• Before operating the copier again
after it has been moved, slide the
platen all the way to the right and
then back to the center position
by hand.
12
01/ PC140-USA
Carrying the Copier by
the Carrying Handle
Fold the trays up as shown in the
illustration, and insert the trays into the
opening between the disc and the platen
cover. Then pull out the carrying handle.
(See "Parts and Their Functions",
on p. 15.)
12
Firmly grip the carrying handle. Slowly tilt
the copier upward. Then lift the copier.
When the unit is tilted the platen will
automatically lock into place.
10/10/03, 7:35 AM