Canon VB-C60 Start Manual page 52

Canon vb-c60: quick start

Hide thumbs Also See for VB-C60:

Table of Contents

Step 3 Perform Initial Setting of the Camera

5. Click [OK].

Note

To obtain an IP address from the DHCP server, first you need to set an address using VB

Initial Setting Tool, which enables to communicate with the PC for setting. Then, change the

[IP Address Setting] for LAN to [Auto (DHCP)] in [Network] in the Setting page. See "LAN"

(

Operation Guide).

The camera will stop issuing IP address assignment requests in 20 minutes after its power

is turned on, after which VB Initial Setting Tool can no longer be detected. In this case, turn

on the camera again.

2-12

This completes the initial setting.

Table of Contents

Vb-c60b