Tripp Lite B110-SP-CAT-OD2 Quick Start Manual page 8

P68-rated gigabit poe outdoor in-line

Hide thumbs Also See for B110-SP-CAT-OD2:

Table of Contents

Installation

7. Once both bare wires are connected, secure the PCBA

board to the enclosure using the included mounting screws.

Then, attach the grounding wire to the available screw on

the PCBA board.

Note: Make sure you connect your source to the cable end and your

PoE-compliant device to the equipment end.

8. Screw the front cover to the back portion of the enclosure

using the included unit cover screws.

9. The connected PoE device is now protected.

Table of Contents