Controls & Features - Escort MAXcam 360c Owner's Manual

Introduction
CONTROLS & FEATURES
Camera Lens
Speaker
(Bottom of unit)
Mark
Sensitivity
Rotary Dial
Turn to change
volume/setting
Mute
Power
Press to power on. Hold for two seconds to power
off.
SEN
Press SEN to adjust the X and K band radar
detection sensitivity/range. Auto = speed adjusted.
The slower you travel, the shorter the X and K band
detection range. At 50 mph and above, X and K
detection range is at maximum. Ka band detection
range is always at maximum, regardless of the SEN
setting.
MUTE
To silence an alert, press the MUTE button during
the alert. Once the radar or laser encounter has
passed, the mute will disengage, and the audio will
return to your preset level. You can also silence an
alert by pressing the SmartCord MUTE button.
BRT
Brightness. Press to adjust the display brightness.
EZ Mag Mount™ Area
Power
Program
(Hold for Emergency
Recording)
Brightness
Display
MRK
To mark a location for future alerts:
• Press MRK twice
• Rotate the Volume/Rotary Dial to select the type
of marker type of marker
• Press MRK again to confirm
To unmark a location alert, press MRK twice while
receiving a marker alert.
Program
Briefly press PRG to access the programming
menu. To start an emergency recording, hold PRG
until MAXcam 360c states "Emergency Recording".
The recording will automatically stop according to
the Loop Clip Time setting.
Rotary Dial
Rotate to adjust volume. When in the Menu or
using MRK, rotate to change the setting.
5
Introduction
Using MAXcam 360c
1 Plug small end of SmartCord into modular jack
on MAXcam 360c and large end of SmartCord
into your car's lighter/accessory socket.
2 MAXcam 360c should power on automatically.
If not, press the device's PWR button.
Software Updates
MAXcam 360c's red light and speed camera
database and firmware are updated by connecting
MAXcam 360c to a Wi-Fi hotspot with internet
access using the Drive Smarter app on your
smartphone. Once connected, MAXcam 360c
will check for available updates. If an update is
available, MAXcam 360c will prompt you to install
the update. If you refuse to perform the update, or
if the prompt times out, MAXcam 360c will check
again when it connects to a Wi-Fi hotspot.
Importantly note that Defender database updates
require first registering MAXcam 360c to activate
the included 90 day Defender subscription.
Defender subscriptions are available at
EscortRadar.com
Modular Jack
Connects to SmartCord
powering your device
SD Card Slot
Earphone Jack
16GB SD Card Included
Connect to optional 3.5
and pre-Installed
mm stereo earphone
Mini USB Jack
Connects to your computer via USB A/mini
B cable for downloading movie clips
Using SmartCord USB
• Mute Button:
- Press to mute the audio for a specific alert.
- Press three times to lock out a false alert.
- Press twice while receiving a locked-out alert
to unlock.
- When connected to the Drive Smarter app
press and hold the mute button on unit or
cord to manually report to other user
a verified X or K-band alert, or police office
observing traffic.
• Alert Light: Blinks red when receiving an alert.
• Power Light: Lights green when device is
powered on.
• USB Charging Port: Charge smartphones,
tablets and other USB-charged devices.
Smartcord USB Adapter
Connects to lighter/accessory
socket
Modular Connector
Plugs into detector jack
6