JVC HR-S3800U Service Manual page 12

1.6.5 Emergency detail information
The type of the cassette tape and the cassette tape wind-
ing position can be confirmed based on the figure in EMG
2
detail information .
[FDP display]
5 : 6 : *
* * 7
5 : Type of the cassette tape in use
*
6 : Winding position of the cassette tape in use
*
: Type of the cassette tape in use
7
*
area)
NOTE: • EMG detail information
formation stored using the remaining tape de-
tection function of the cassette tape. As a re-
sult, it may not identify cassette correctly when
a special cassette tape is used or when the tape
has variable thickness.
1
5 : Cassette tape type
*
Display Cassette Tape Type
00 Cassette type not identified
16 Large reel/small reel (T-0 to T-15/T-130 to T-210)
not classified
82 Small reel, thick tape (T-120) identified
/thin tape (T-140) identified
84 Large reel (T-0 to T-60) identified
92 Small reel, thick tape (T-130) identified
/thin tape (T-160 to T-210) identified
93 Small reel, thick tape/C cassette
(T-0 to T-100/C cassette) not classified
C3 Small reel, thick tape/C cassette
(T-0 to T-100/C cassette) being classified
D3 Small reel, thick tape/C cassette
(T-0 to T-100/C cassette) being classified
E1 C cassette, thick tape (TC-10 to TC-20)
identified
E2 Small reel, thick tape (T-0 to T-100)
identified
E9 C cassette, thin tape (TC-30 to TC-40)
identified
F1 C cassette, thick tape/thin tape (TC-10 to TC-40)
not classified
NOTES: • Cassette tape type
during mode transition and the identification
count is variable depending on the cassette
tape type. If an EMG occurs in the middle of
identification, the cassette tape type may not
be able to be identified.
• If other value than those listed in the above ta-
ble is displayed, the cassette tape type is not
identified.
2
1
2
(Winding
2
is the reference in-
1
1
is identified a few times
6 : Cassette tape winding position
*
The cassette tape winding position at the moment of EMG
is displayed by dividing the entire tape (from the beginning
to the end) in 22 sections using a hex number from "00" to
"15".
"00" : End of winding
"15" : Beginning of winding
"FF" : Tape position not identified
2
: Cassette tape type (Winding area)
7
*
Display Cassette Tape Type
00 Cassette type not identified
07 Small reel, thick tape
08 - 0E C cassette, thick tape
09 - 15 C cassette, thick tape
0A - 0B Small reel, thick tape
0A - 16 C cassette, thin tape
0A - 16 C cassette, thin tape
0D - 0F Small reel, thick tape
11 - 14 Small reel, thick tape
15 - 18 Small reel, thick tape
17 - 1A Small reel, thick tape
19 - 1D Small reel, thick tape
1D - 21 Small reel, thick tape
1E - 1F Small reel, thin tape
1F - 23 Small reel, thick tape
21 - 23 Small reel, thin tape
21 - 23 Small reel, thin tape
22 - 24 Small reel, thick tape
22 - 24 Small reel, thin tape
22 - 24 Small reel, thin tape
22 - 23 Large reel
23 - 24 Large reel
25 - 26 Large reel
27 - 29 Large reel
29 - 2B Large reel
2D - 2F Large reel
NOTE: • The values of cassette tape type
table are typical values with representative cas-
sette tapes.
2
T-5
TC-10
TC-20P
T-20
TC-30
TC-40
T-40
T-60
T-80/DF-160
T-80/DF-180
T-100
T-120/DF-240
T-140
T-130
T-160
T-168
DF-300
T-180/DF-380
T-210/DF-420
T-5
T-10
T-20
T-30
T-40
T-60
2
in the above
1-9