Canon CanoScan LiDE 35 Quick Start Manual page 9

3
Click the [File] menu and choose [Select Source].
Select your scanner model name and click the [Select] button
for Windows or the [OK] button for Macintosh.
• After you set this setting the first time, you
do not need to set it from the second time
onward with the same scanner.
• You will need to reset this setting if you
select a different scanner or a digital
camera.
4
Click the Acquire icon
and select [Acquire].
ScanGear CS will start.
5
Select the [Select Source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document
(Grayscale).
6
Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
The image is automatically cropped at its original size.
If you want to trim the image further, drag the mouse
diagonally to select the area.
• Do not open the document cover while a
scan is in progress.
7
Select the [Destination].
You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300 dpi.
When [Image display] is selected, it is set to 150 dpi.
[Print] is selected in this example.
or click the [File] menu
Try Scanning
9