Page 1
Models: NPOEI-60W-1G, NPOEI-90W-1G Este manual está disponible en español en la página de Tripp Lite: tripplite.com/support Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com/support Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: tripplite.com/support Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: tripplite.com/support...
• Compact, hand-sized metal housings ready for mounting on any DIN rail • Plug-and-play operation with no configuration required for easy, immediate installation Package Contents • NPOEI-60W-1G or NPOEI-90W-1G PoE Injector • DIN Rail Kit • Quick Start Guide -04-050 933E82-EN.indd 2 -04-050 933E82-EN.indd 2...
Page 3
Applications The PoE Injectors provide power up to 60W (NPOEI-60W-1G) or 90W (NPOEI-90W-1G) to use power more efficiently on PoE devices, including surveillance cameras, VoIP phones, outdoor kiosks and smart PoE lights. Notes: • NPOEI-60W-1G is recommended for Wi-Fi applications that require more than 30W of power.
Page 4
Mounting and Dismounting Instructions Notes: • These open-type devices shall be DIN-rail mounted or wall mounted (optional) in a cabinet or enclosure where the ambient temperature shall not exceed 75°C. • Caution: Hot surface! Do not touch. Please wear protective equipment before coming into contact.
Grounding the PoE Injector Note: These PoE injectors are intended to be mounted to a well- grounded mounting surface, such as a metal panel. Grounding and wire routing help limit the effects of line noise due to electromagnetic interferences (EMI). Run the ground connection from the ground screw to the grounding surface before connecting.
Wiring Requirements Wiring Power Input You can use “Terminal Block (PWR)” for Primary Power Input and “Terminal Block (RPS)” for secondary power source for Redundant Power Input. Caution: • Use copper conductors only • Wiring cable temperature should support at least 105°C •...
Page 7
Wiring Requirements Connecting to Terminal Block To insert power wire and connect the 24-57VDC at a maximum of 4A DC power to the power terminal block, please follow the steps below: 1. Use a flat-head screwdriver to loosen the wire-clamp screws. 2.
Page 8
Wiring Requirements Wiring the Relay Contact (ALM) The NPOEI-60W-1G and NPOEI-90W-1G have one set of relay alarm outputs. This relay contact uses two contacts of the terminal block on the top panel of the unit. The two contacts of the 6-pin terminal block connector are used to detect user-configured events.
Wiring Requirements RJ45 Cabling Connect one end of a user-supplied RJ45 cable to an Ethernet port and the other end to the PoE Injector. Note: Cat5e cable or above is recommended for best results. DIP Switch Settings Primary power alarm reporting enabled Primary power alarm reporting disabled...
Specifications General Specifications Product Name NPOEI-60W-1G NPOEI-90W-1G Product Type PoE Injector PoE Injector Housing Metal Metal Housing Rating IP-30 IP-30 Weight 0.85 lb. (385 g) 0.85 lb. (385 g) Dimensions 1 x 4.6 x 4 in. 0.9 x 4.3 x 2.9 in.
Page 11
Specifications Specification Conformance Normal Specification IEEE 802.3af (Type1), IEEE 802.3af (Type1), 802.3at (Type 2), 802.3at, 802.3bt 802.3bt (Type 3) Type 3, 4) MDI/MDX Plug and Play PD Detection Function Overload Protection Meets RoHS 3 Specifications Meets FCC Requirements Vibration Specification EN 60068-2-6 EN 60068-2-6 Shock Specification...
LED Indicators NPOEI-60W-1G Illuminated Primary Power on (Green) Primary Power off or failure Illuminated Redundant Power on (Green) Redundant Power off or failure Illuminated Alarm for following conditions (Red) (when DIP switches are turned on): • Primary Power lost • Secondary Power lost •...
Page 13
LED Indicators NPOEI-90W-1G Illuminated Primary Power on (Green) Primary Power off or failure Illuminated Redundant Power on (Green) Redundant Power off or failure Illuminated Alarm for following conditions (Red) (when DIP switches are turned on): • Primary Power lost • Secondary Power lost •...
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite, they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) •...