Scanner Not Identified
If the scanner is not identified, check the following in order.
Windows
SCSI card installed?
Yes
[SCSI Controller] icon displayed on
Windows [Device Manager] tab?
Yes
[SCSI Driver] icon displayed on
SCSI Controller icon?
Yes
Is the [!] mark displayed in
the [SCSI Driver]?
Yes
Are there other SCSI boards
installed other than this board?
Yes
Scanner not identified (Part 1)
No
Install the SCSI card
No
Reinstall the SCSI card
No
Reinstall the SCSI driver
No
No
Reinstall SCSI driver
Change address of the IRQ and I/O port
Macintosh
Let's go to [Scanner Not Identified
(Part 2)] (Next page)
98