Install The Software - Canon PIXMA iP4700 Series Getting Started

5

Install the Software

To use the printer by connecting it to a computer, software including the drivers
needs to be copied (installed) to the computer's hard disk. The installation process
takes about 20 minutes. (The installation time varies depending on the computer
environment or the number of applications to be installed.)
The screens below are based on Windows Vista operating system Ultimate Edition
(hereafter referred to as "Windows Vista") and Mac OS X v.10.5.x.
• Quit all running applications before installation.
• Log on as the administrator (or a member of the Administrators group).
• Do not switch users during the installation process.
• Internet connection may be required during the installation. Connection fees apply.
• It may be necessary to restart your computer during the installation process. Follow the on-
screen instructions and do not remove the Setup CD-ROM during restarting. The installation
resumes once your computer has restarted.
• Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not supported.
0
□ If the Found New Hardware or Found New
Hardware Wizard dialog box appears:
If you connect a USB cable to the printer before
installation of the drivers, this screen appears.
1
Remove the USB cable connected to
your computer.
The dialog box may close. In this case, proceed
from .
2
Click Cancel to quit the dialog box.
3
Proceed from .