Brother Computerized Embroidery Machine Operation Manual page 27

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
While holding the thread near the spool with
h
your right hand, as shown, pull the thread with
your left hand, and then pass the thread
behind the thread guide cover and to the front.
a Thread guide cover
i Pass the thread under the thread guide plate,
and then pull it to the right.
1
a Thread guide plate
26
1
Pass the thread under the hook on the thread
j
guide, and then wind it counterclockwise
under the pretension disk.
a Thread guide
Note
Make sure that the thread passes under the
pretension disk.
k While holding the thread with your left hand,
wind the thread that was pulled out clockwise
around the bobbin five or six times with your
right hand.
Note
Make sure that the thread between the spool
and the bobbin is pulled tight.
Be sure to wind the thread clockwise around
the bobbin, otherwise the thread will
become wrapped around the bobbin winder
shaft.
1
1