Canon i475D Series Printing Manual page 33

To cancel an operation, press the Maintenance
Note
from the beginning.
4
Exit the maintenance mode.
(2) Using
pattern number (+7 to –3) of the checked
pattern in column A.
(3) Press the OK
The screen for selecting a pattern in column B
("b") appears.
Maintenance Maintenance button and retry the procedure Maintenance
Column"K" (4) Repeat the above procedure to determine the
pattern numbers (+7 to –3) of the checked
patterns in columns B through E and the
pattern numbers (+5 to –5) of the checked
patterns in columns F through K.
When pattern numbers have been
determined up to column K, maintenance
mode number 04
alignment is complete.
(1) Press the Maintenance
You can exit the maintenance mode.
Printing Maintenance
(cursor buttons), display the
OK button. OK OK
04 is displayed again and head 04 04
Maintenance button.
Maintenance Maintenance
33