3. INSTALLATION
3-12. Installing the belt cover
(2)
(3)
(4)
3-13. Installing the foot switch
3-14. Installing the spool stand
14
(1)
1177S
(1)
(3)
(2)
1178S
(1)
0073Q
BAS-311F-0, 311F-L, 326F-0
1. Loosen the two screws (2) of the upper cover (1).
2. Insert the belt cover (3) in the direction of the arrow,
and then secure it with the two screws (2) and the two
screws (4).
* it is not necessary to remove the belt cover (3)
when tilting back the machine head.
Insert the connector of the foot switch (2) into the
connector (3) of the control box (1).
Install the spool stand (1) to the table.