Table of Contents
Advertisement
Available languages
Available languages
GB
Safety
CAUTION! Danger of electrical shock!
The housing contains current-carrying components.
Contact can lead to personal injury! All work on the mains
network and the device may only be done by an authorised
electrician.
• Disconnect power supply from the device.
• Secure the device against being powered on again.
• Check that the device is powered off.
• Close the housing securely before applying power.
This device is only intended to be used for its stated application.
Unauthorised conversions, modifications or changes are not
permissible! This device may not be used in conjunction with
other devices whose operation could present a hazard to people,
animals or property.
The following must be observed:
• Prevailing statutes, standards and regulations.
• State-of-the-art technology at the time of installation.
• The device's operating instructions.
• Operating instructions can only cite general stipulations.
These are to be viewed in the context of a specific system.
General Information
Disposal of the device
Do not dispose of old devices in the household waste! The device
must be disposed of in compliance with the laws and standards of
the country in which it is operated! The device contains electrical
components that must be disposed of as electronics waste. The
enclosure is made from recyclable plastic.
Warranty conditions
These operating instructions are an integral part of both the device
and our terms of warranty. They must be handed over to the
user. The technical design of the appliance is subject to change
without prior notification. PEHA products are manufactured and
quality-checked with the latest technology according to applicable
national and international regulations. Nevertheless, if a product
should exhibit a defect, PEHA warrants to make remedy as follows
(regardless of any claims against the dealer to which the end user
may be entitled as a result of the sales transaction): In the event of
a justified and properly-established claim, PEHA shall exercise its
prerogative to either repair or replace the defective device. Further
claims or liability for consequential damage are explicitly excluded.
A justifiable deficiency is deemed to exist if the device exhibits a
structural, manufacturing, or material defect that makes it unusable
or substantially impairs its utility at the time it is turned over to the
end user. The warranty does not apply to natural wear, improper
usage, incorrect connection, device tampering or the effects of
external influences. The warranty period is 24 months from the
date of purchase by the end user from a dealer and ends not later
than 36 months after the device's date of manufacture. German law
shall be applicable for the settlement of warranty claims.
PEHA Lichtsteuerung – PEHA Elektro GmbH & Co. KG a Honeywell Company · Gartenstraße 49 · 58511 Lüdenscheid · Deutschland · www.peha.de · peha@peha.de
Technical Data
MLS CABLE:
1.5mm
2
unscreened twisted-pair: see Application Note AN4001
DIMMING CABLE:
1mm
2-core mains rated cable
2
DIMMING OUTPUT:
up to 25 ballasts (DSI or DALI - not mixed)
POWER SUPPLY:
230V ~ 50Hz
POWER CONSUMPTION:
< 10W
TERMINAL CAPACITY:
1 x 2.5mm
2
cable
ta:
0 - 40°C
DIMENSIONS:
Module (including supporting frame): 82mm x 144mm
Fascia: 86mm x 146mm
Fascias must be ordered separately using the following part codes:
D MSSPBSS – Brushed Stainless Steel
D MSSPPBR – Polished Brass
D MSSPPOC – Polished Chrome
D MSSPWHI – White
Disposal and recycling:
At the end of their useful life the packaging and product should be disposed
of via a suitable recycling centre.
Do not dispose of with normal household waste.
Do not burn.
W4368D_DE_1204
Seite 7/7
Advertisement
Table of Contents
