Checking The Focus - Canon Powershot SX120 IS User Manual

Checking the Focus

You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the l button, and switch
to the focus check display (p. 45).
●
For images with detected faces, you can
also switch to the focus check display by
pressing the 0 button.
A white frame will appear where the AF
frame or face was when the focus was
set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
Move the zoom lever toward k once.
●
The screen shown to the left will appear.
Press the 0 button to switch between
●
frames of detected faces.
Press the m button to switch between
●
frames other than those of detected faces.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the opqr buttons to change
the display position while checking the
focus.
Pressing the n button resets the
●
display to Step 1.
103