EverFocus EBD-330A Quick Start Manual

EBD-330A
1/3" day / night camera with IR-LED
Safety Warning
• Operate the camera with stabilized 12VDC +/- 1V
power supplies only.
• Do not operate the camera beyond the specified
temperature, humidity or power source ratings.
Use the camera at temperatures within -10°
~+50°C.
• Never face the camera towards the sun.
Direct sunlight or severe rays may cause fatal
damage to both sensor and internal circuit.
• Do not open the camera module. There are no
adjustable parts.
This product is RoHS compliant.
This is a Class B product which can be used in
commercial and limited industrial areas.
Your EverFocus product is designed and
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic
equipment should be disposed of separately from
your household waste at their end-of-life.
Please dispose of this equipment at your local
community waste collection / recycling centre. In
the European Union, there are separate collection
systems for used electrical and electronic
products.
Please help us to conserve the environment we
live in!
Features
• 3 - axis ajustment
• 20 Infrared LED, light sensor controlled
• Splitted front glass to avoid IR reflections
• Solid Aluminium camera housing
• Waterproof design
Dimensions
Specifications
* The IR illumination range depends on the location, particularly with regard to
the reflections of the installation's surroundings. Locating the device near to
highly absorbent surfaces can result in a significantly reduced range.
Installation
1. Unscrew the hex screw at the lock ring.
2. Unlock and remove the lock ring.
3. Mount the camera base to wall / ceiling.
4. Connect the installation cables.
5. Assemble camera module with lock ring.
94
6. Adjust pan and tilt of the camera.
7. Screw the lock ring to lock position and fix the ring with
the hex screw.
8. Switch-on power supply.
Sensor
Picture element
Horizontal resolution
Sensitivity
IR-LED
IR-LED lifetime
IR range
Video output
S/N ratio
Gamma correction
Synchronisation
Back light compensation
Auto white balance
AGC
Electronic shutter
Lens
Mounting
Casing
Weatherproof rating
Power source
Power consumption
Ambient temperature
Dimensions
Weight
1/3" SONY CCD
752 x 582 (PAL)
480 TV lines
0,5 lux / F = 1.2 (IR-LED off)
20x controlled by internal twilight
switch,
splitted front glass for low internal
IR reflection
up to 50.000 h
5 ~ 20 m*
1 Vp-p composite PAL
over 48 dB
0,45
Internal
Yes
Yes
Yes
1:50 ~ 1:12.000
3,6mm / F2, M12 x P0,5
Ceiling / wall, 3-axis camera
adjustment
Aluminium
IP 66
12 V DC +/- 10%
6W max.
-10°C ~ +50°C
94 (diameter) x 82 (height) mm
450 g