Table of Contents
Advertisement
Options Summary
Bit offset
Fill bit offset for register, for robot to compare with bit value.
Interface: Super I/O
Options Summary
Super I/O LDN
Fill LDN number to a Super I/O device. Range: 0~FF
Device
Select that robot should or should not do action if condition met.
In condition
Select the condition that robot should check for device.
Present - device is detected
According to register - Robot read register according to configuration.
Note: Device will be considered 'Present' by Robot, when data read from
device is not 0xFF.
Table Continue on Next Page...
Register data is
Chapter 3 – AMI BIOS Setup
0
0
is
Is not
Present
Specified register data
bitwise equal to
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
56
Advertisement
Table of Contents
