10 Basic settings
You can configure the appliance to meet your needs.
10.1 Overview of the basic settings
Display
Setting
Childproof lock
Audible signals
Switching off the hotplates automatically
Duration of the timer end signal tone
Power limitation
This makes it possible to limit the total power
of the hob in accordance with the require-
ments of the specific electrical installation. If
the function is active and the hob has
reached the set power limit,
and you cannot select a higher power level.
The available settings depend on the max-
imum power of the hob, which is specified
on the rating plate.
Selected time for the hotplate
Cookware test
Result of the cooking process
Automatic management with power limitation
Restoring factory settings
1
Factory setting
10.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, press and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or
to view the individual displays.
is displayed
.
for
Display
.
.
Value
1
- Manual.
Automatic.
- Function switched off.
– Confirmation signal and operating error signal are
switched off.
– Only the operating error signal is switched on.
– Only the confirmation signal is switched on.
- All signal tones are switched on
1
- Switched off.
-
- Time until the automatic switch-off.
1
– 10 seconds
– 30 seconds
- 1 minute
- Switches off the hob's maximum power
- 1000 W Lowest power setting
- 1500 W
...
- 3000 W Recommended for 13 A
- 3500 W Recommended for 16 A
- 4000 W
- 4500 W Recommended for 20 A
...
- Maximum power of the hob
Unlimited: The hotplate that was set last remains selec-
1
ted
.
- Limited: The hotplate only remains selected for a few
seconds.
- Not suitable.
- Not optimal.
- Suitable.
- Deactivated: Does not show the power limit unless
1
is activated.
- Switched on: Always displays the power limit.
1
- Individual settings
.
- Factory settings.
Touch
to access the basic settings.
3.
and
light up alternately as well as as a preset
a
value.
Touch
repeatedly until the desired setting ap-
4.
pears.
Use
or
to select the required value.
5.
Touch and hold
6.
a The settings are saved.
10.3 Exiting the basic settings
To exit the basic settings and and switch off the
▶
hob, touch
.
Basic settings en
1
.
1
for four seconds.
9