Changing Functions
The functions listed in the 3 tab are useful functions that you can set for normal
usage. You can set them in the Shooting or Playback mode, by pressing the ·
button.
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
Turning off the Power Saving Function
You can set the power saving function (p. 42) to [Off]. However, setting to
[On] is recommended to save battery power.
118
Select [Start-up Image], then press the qr
●
buttons to select [Off].
●
Choose [Power Saving], then press the
button.
●
Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
●
If you set [Auto Power Down] to [Off], be
careful not to forget to turn off the camera after
use.
m