Shooting With Remotecapture - Canon DIGITAL IXUS V3 Software Starter Manual

84

Shooting with RemoteCapture

RemoteCapture will start if you click the [Edit] menu in ImageBrowser and select
[RemoteCapture] when the camera is connected to the computer via a USB interface.
RemoteCapture lets you control the camera's shutter remotely from the computer to
shoot still images.
• You can also save images directly to the computer by pressing the
• You may notice that the interval between the shutter release and activation is
• Images shot with RemoteCapture are automatically saved to the folder
• You cannot use RemoteCapture when the USB Mounter is running (p. 89).
• Save-RemoteCapture Window
Thumbnail View
Displays thumbnails of all the images
shot after RemoteCapture is started.
Image Display Area
Displays the image selected in the Thumbnail View.
camera's shutter button. However, other buttons and switches on the
camera, including the zoom, will not operate with a transmission in
progress.
slightly longer when RemoteCapture is used to shoot than when the camera
is used in the normal fashion.
selected in ImageBrowser.
Connect/Disconnect Button
Click here to open a connection to the camera and
display the RemoteCapture Shooting window. It will
change to the Disconnect button while a connection
is open. Click it to close the connection.
View Button
Select an image in the Thumbnail View and click
here to display it in the Image Display Area.
Delete Button
Select an image in the Thumbnail View and click here
to delete it. Since it is deleted from the computer too,
ensure that you have the correct image.
Check the distribution of brightness data here.
Check the image settings here.
Add a comment about the image here.