Setting Custom Functions - Canon EOS 50D Instruction Manual

Setting Custom FunctionsN
3
Custom Function No.
Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
Even after all the Custom Functions are cleared, the setting for [8C.Fn IV -
5: Focusing Screen] will remain intact.
172
Select [8].
1
Turn the <6> dial to select the [8]
tab.
Select the group.
2
Turn the <5> dial to select C.Fn I -
IV, then press <0>.
Select the Custom Function
3
number.
Turn the <5> dial to select the
Custom Function No., then press
<0>.
Change the setting as desired.
4
Turn the <5> dial to select the
setting (number), then press <0>.
Repeat steps 2 to 4 if you want to set
other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
numbers.
Exit the setting.
5
Press the <M> button.
The screen for step 2 will reappear.