Canon EOS 1Ds Mark II Instruction Manual page 131

¡
The date may look light if it is imprinted on a bright background or border.
¡
If [Multiple] is selected, [Borders] and [Date] cannot be selected.
[Borderless] will be set and [Date] will be set to [Off]. The image will also
be cut off along all four edges.
¡
If [Date] is set to [On], the recorded date will be imprinted on the lower
right of the print.
¡
If you select [Stop] while printing only one picture, the printing will not
stop until it finishes printing the picture. If you are printing multiple
pictures, the printing will stop after the current picture is finished printing.
¡
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select [Stop] or [Resume] (after resolving the
problem). If [Resume] is not displayed, select [Stop].
6
Print the image.
¡Select [Print].
s
The printing will start.
¡When the printing ends, the screen
will return to step 1.
¡To cancel the printing, press the
X
< > button while [Stop] is
displayed, then select [OK].
131