Specifying The Color Matrix - Canon EOS 1D Software Instruction Manual

Shot Settings
5
Enter a title in the [Title] input box.
6
Click the [Apply to camera] button.
The white balance is registered on the camera.
To register another setting, repeat steps 2 to 6. You can register up to 3 settings (PC-
1, PC-2 and PC-3).
To delete a registered setting, select the PC (Personal White Balance) from the list
and click the [Delete from camera] button.
7
Click the [Close] button.
The [Personal white balance settings] dialog box closes.

Specifying the Color Matrix

You can specify the color space, color saturation, and color tone, and then register up to two
sets of these settings on the camera. You can also select the predetermined color matrix from
the list box, which helps you to specify the settings
For more information on setting the color matrix on the camera, refer to "Selecting the Color
Matrix" in the camera's Instruction Manual.
1
Click the [Color matrix] button
The [Color Matrix settings] dialog
box appears.
2
Select [CM set1] or [CM set2] from the list box.
This activates the [Color space],
[Saturation], and [Color tone] list
boxes.
If you select any color matrix
setting other than [CM set1] or
[CM set2], you cannot register the
settings on the camera.
W-84
.
(W-77)