Table of Contents
Advertisement
First boiling.
Pour water in a
thermo pot to a
mark "FULL" and
close a cover.
Attention: In order
to avoid a device
3.
overheat it is not
recommended to
pour less than 0.5 I
of water and above
mark FULL. In
avoidance boil regu-
larly add water.
4.
Connect a food cord
in the socket. The
thermo pot will join
automatically; the
boiling indicator red
colour thus will
light up.
5.
After water has be-
gun to boil also a
teapot has passed in
a "Keep warm"
mode and the indi-
cator of green col-
our has lighted up,
press button
"PRESS" and merge
in such a way half
of water.
6.
Then disconnect a
power supplies, hav-
ing taken out a plug
from the socket,
disconnect a cord,
uncover and merge
the remained water
as is shown in draw-
ing.
7.
After that the tea-
pot-thermos can use
in a usual mode.
Pour fresh water to
mark FULL and
connect a power
cord in a network.
The teapot-thermos
will join automati-
cally, the boiling
indicator red colour
thus will light up.
6
8.
Keep warm.
At boiling of water
the teapot-thermos
will be switched in a
mode of mainte-
nance of tempera-
ture automatically,
the indicator boiling
will go out and the
indicator of mainte-
nance of tempera-
ture of green colour
will light up.
ATTENTION:
Your teapot-thermos
is equipped by sys-
tem "switching-off
at an insufficient
quantity of water".
If in the device is
not present or not
enough water, it will
automatically shut
off.
9.
3 ways of boiling:
After the indicator
of boiling red colour
will go out and the
indicator of mainte-
nance of tempera-
ture of green colour
will light up can
start to boil hot wa-
ter lips having es-
tablished a cup un-
der a nose.
1. Press and keep
button PRESS until
then while the cup
not to be filled with
water.
2. Bring a cup to a
nose of the device
and press cup edge
the button of flood
of water.
3. Pressing the but-
ton of mechanical
flood of water.
Reboil.
10.
Temperature of
automatic heating of
water below boiling
temperature. If nec-
essary if you want,
the teapot-thermos
allows finishing
water to boiling
quickly. For this
purpose push button
«REBOIL».
III. CLEANING
Before device clearing disconnect it from
the electric plug and merge all water. It is
7
Advertisement
Table of Contents
