Connectors; Switching Between Sleep, Standby And On - PURE One Flow User Manual

Connectors

Switching between Sleep, Standby and On

One Flow has three power modes, Standby, Sleep and On. In Standby, One Flow uses minimal power.
In Sleep mode, One Flow remains connected to the wireless network (once attached) and is ready to
stream music using Pure Stream. See page 11 for more information.
To enter Sleep mode, press Standby.
To enter Standby mode, press and hold Standby.
Once in Sleep/Standby mode, press Standby to switch to On.
6
Standby
Press to switch One Flow between Sleep, Standby
and On. See below for more information.
If One Flow is being powered by ChargePAK
Note:
E1, pressing Standby will switch One Flow off.
Mini USB socket
For software updates and Pure Mini USB
Ethernet adapter.
3.5mm stereo headphone socket
Aux in
You can use One Flow to listen to music
stored on an iPod or other portable music
player. You will need a suitable 3.5mm to
3.5mm auxiliary lead (not supplied).