Canon FS10 Instruction Manual page 83

Digital video camcorder
Hide thumbs Also See for FS10:
Table of Contents

Advertisement

Recording
Pressing
Start/Stop
will not start recording.
- You cannot record while the camcorder is writing previous recording onto the memory (while the ACCESS
indicator is on or flashing).
- The memory is full or it already contains 999 scenes (the maximum number of scenes). Delete some
recordings (
41, 58) or initialize the memory (
The point where
Start/Stop
- There is a slight interval between pressing
malfunction.
The camcorder will not focus.
- Autofocus does not work on the subject. Focus manually (
- Lens is dirty. Clean the lens with a soft lens-cleaning cloth (
A vertical light bar appears on the screen.
- Bright light in a dark scene may cause a vertical light bar (smear) to appear. This is not a malfunction.
Changing the operating mode between recording (
usual.
- When the memory contains a large number of scenes, some operations may take longer than usual. Back up
your recordings (
Reviewing the last scene recorded takes longer than usual.
- This may occur as movies and still images are recorded/deleted over time. Back up your recordings (
and initialize the memory (
Movies or still images cannot be recorded properly.
- This may occur as movies and still images are recorded/deleted over time. Back up your recordings (
and initialize the memory (
Playback
Cannot add scenes to the playlist.
- The playlist cannot contain more than 99 scenes or 100 hours of scenes.
- You may not be able to add scenes to the playlist if they were recorded or edited using another device.
Cannot delete a scene.
- You may not be able to delete scenes recorded or edited using another device.
Deleting scenes takes longer than usual.
- When the memory contains a large number of scenes, some operations may take longer than usual. Back up
your recordings (
Cannot erase a still image
- The still image is protected. Remove the protection (
was pressed does not match the beginning/end of the recording.
Start/Stop
68) and initialize the memory (
30).
30).
68) and initialize the memory (
30) to free some space.
and the actual start of recording. This is not a
46
).
). Never use tissue paper to clean the lens.
96
)/record pause (
)/playback (
30).
30).
60).
) takes longer than
68)
68)
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs100Fs112686b0012699b001

Table of Contents