Viewing Still Images - Canon DC10 Instruction Manual

Viewing Still Images

1. Open the LCD panel.
2. Holding the lock button pressed
down move the power switch to
PLAY and slide the
to the (STILLS) position.
3. If necessary, change the media
for the still images using the
procedure described in the
Recording Still Images section
( 36).
• You can show the still images on the
memory card or the disc. The default
media for still images is the memory
card.
• As long as you do not change the
media selection, the camcorder will
show the still images recorded on the
media that was selected last.
4. Use the omni selector (
Slide Show
( 59)
1. Press the FUNC. button.
2. Use the omni selector (
to make the selection.
3. Use the omni selector (
the slideshow.
• Images are played back one after another.
• Press the button to stop the slide show.
Index Screen
1. Move the zoom lever toward W.
The stills index screen appears with the first six still images.
2. Use the omni selector (
• Move the " " to the image you wish to view.
• You can switch between index pages by pressing the + or – button.
3. Move the zoom lever toward T.
The index screen closes and the selected image is displayed.
/ switch
) to move between images.
SLIDE SHOW
) to select [
) to select [START] and press (
,
SLIDE SHOW] and press (
) to select an image.
E
)
) to start
41