Program Source Connections - Cambridge SoundWorks SoundWorks SoundWorks Instructions Manual

Program Source Connections

Connect the Volume Control's
FROM SOURCE lead to the audio
output of your computer or other
program source. Connect the TO
SUB lead to the Audio Input of
SoundWorks' subwoofer as shown.
The control can be mounted on the
side of your computer monitor or
other surface using the adhesive
strip provided (see opposite page).
If the program source has its
own level control, set it at least
half-way up, and then use the
Volume Control to achieve your
preferred playback level. If there's
audible hum or hiss, or if the
Volume Control adjustment range
is unsatisfactory, readjust the
program source's level control up
or down (and the Volume Control
accordingly).
Computer CPU/
program source
Avoid using
SPEAKER LINE
OUT OUT
this kind of
output.
+
BASS
120V 60HZ 30W
LEVEL
POWER
ON/OFF 12V DC IN AUDIO
INPUT
L
–
SPEAKERS
Subwoofer
Long lead
(TO SUB)
Short lead
(FROM SOURCE)
+
Volume Control
R
–
4
Computer monitor