After Unpacking; Inspecting For Damage - Cambridge SoundWorks NEWTON T300 User Manual

INTRODUCTION
Introduction
Thanks for choosing a Newton Series loudspeaker. The
T1000 and T500 both feature the finest drivers, preci-
sion internal crossover and amplifier circuitry and an
elegant enclosure design.
The Product Development Team at Cambridge
SoundWorks believes there is no better combination of
audiophile-level attention to detail and reasonable
cost.

AFTER UNPACKING

Store the shipping carton and packing material for
future transport needs.
CONTENTS
A) One Loudspeaker
B) Two Cast Alloy Support Stands
C) Eight Stand Bolts
D) AC cord
E) Four threaded posts ("spikes")
F) Four disc feet
D
A
G) Four lock nuts
H) Four soft foot pads
Also necessary:
A philips screwdriver (no.2, preferably)
to install the stands
Two lengths of speaker wire
B
or
Two lengths of speaker wire plus two signal cables
with RCA plugs at each end to connect the speakers
to a receiver or amplifier.
G
See pages 10 and 12 to determine what wire and
C
cable you need.
E

INSPECTING FOR DAMAGE

Examine the speaker system carefully for shipping
damage. If there is any, do not install or use the sys-
tem. Return the speaker to the store where you made
F
the purchase or call Cambridge SoundWorks at 1-800
FOR-HIFI (1-800-367-4434) for assistance.
H
4