Specifications - Cambridge SoundWorks NEWTON T100 User Manual

SPECIFICATIONS

1 3 1
Dimensions (H x W x D): 32 / x 7 / x 12 / inches
2 8 2
(825 x 186 x 320 mm)
3
Base width: 11 / inches (284mm)
16
Weight: 34 pounds
The T100 can be safely used with receivers rated above
20 watts per channel. There is little advantage to using a
receiver larger than 200 watts per channel with these speak-
ers, but any size receiver may be used should it be available,
so long as the receiver is not operated at excessive levels.
Warning About Excessive Amplifier Distortion
Operating a receiver (of any power rating) beyond its maxi-
mum undistorted output level creates distortion - added high-
frequency sound not part of the musical program. Distortion
dramatically increases the internal operating temperature of a
loudspeaker and will eventually cause the speakers to fail
due to burned or melted internal parts. While Cambridge
SoundWorks includes the most heat-tolerant parts commen-
surate with good acoustic design, the speaker's Limited
Warranty against defects in materials or workmanship does
not apply to parts that show evidence of having failed from
long-term operation at very high temperatures.
Enclosure Cleaning
The speaker enclosures can be cleaned with a window-
cleaning product. Use a soft, lint-free cloth only. Avoid spray-
ing any cleaner on the grille panels.
Brush or vacuum the grille panels if dust accumulates
on them.
7