Cd/Mp3 Operation; Playback Of An Entire Cd/Mp3 - Superior NE-566MP3 User Manual

27731 AE Micro System IM L-O-A 10/11/06 3:39 PM Page 34

CD/MP3 OPERATION /

PLAYBACK OF AN ENTIRE CD/MP3

CD/MP3 OPERATION
1. Press the FUNCTION SELECTOR (21) on the appliance and select the CD mode.
2. To play a CD/MP3, first open the CD tray with the button OPEN/CLOSE (19). "OPEN" will appear on the display
(3) (see graphic 3).
3. Place the CD/MP3 disc, with the label facing up, in the CD tray, press the button OPEN/CLOSE again and the CD
tray will close automatically.
4. The appliance will begin to read automatically ("READ") and changes to CD/MP3 mode.
NOTE:
(1) This appliance can be used to play CD, CD-R, CD-RW and MP3 discs.
(2) If no disc has been inserted or the disc cannot be read, NO DISC will appear on the display (see graphic 4).
VOLUME
PLAYBACK OF AN ENTIRE CD/MP3
1. Playback begins by pressing the button PLAY/PAUSE (9). Playback begins with the first track. The track number
currently being played appears on the display along with the already elapsed playback time (see graphic 5).
2. To interrupt playback, press PLAY/PAUSE. The elapsed playback time will blink (see graphic 6).
3. To resume playback, press PLAY/PAUSE again.
4. To end playblack, press STOP (17).
VOLUME
Composite
Graphic 3
Graphic 5
C M Y CM MY CY CMY
VOLUME
Graphic 4
VOLUME
Graphic 6
34
K
E