Download Print this page

UNI-T A37 Important Information page 2

Co2 monitor
Hide thumbs Also See for A37:

Advertisement

Available languages

Available languages

Important information
A37 CO
Monitor
2
Item No. 2302125
Intended use
Use the product to monitor CO2 levels in indoor areas/rooms.
Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this
product. If you use the product for purposes other than those described
above, the product may be damaged. In addition, improper use can result in
short circuits, fires, electric shocks or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European require-
ments. All company names and product names are trademarks of their re-
spective owners. All rights reserved.
Operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to in-
dicate important information in these operating instructions. Always
read this information carefully.
Safety instructions
Read this document and the operating instructions carefully
and especially observe the safety information. If you do not
follow the safety instructions and information on proper han-
dling, we assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and
pets.
• Do not leave packaging material lying around carelessly. This
may become dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sun-
light, strong jolts, high humidity, moisture, flammable gases,
steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out
of operation and protect it from any accidental use. Safe opera-
tion can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient condi-
tions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• Consult an expert when in doubt about the operation, safety or
connection of the appliance.
• Maintenance, modifications and repairs must only be completed
by a technician or an authorised repair centre.
• If you have questions which remain unanswered by these oper-
ating instructions, contact our technical support service or other
technical personnel.
b) CO2 intoxication
WARNING! High concentrations of CO2 can lead to CO2 in-
toxication.
Make sure to observe official CO2 level charts/information and take
necessary action accordingly to protect yourself and others.
c) LiPo battery
• The rechargeable battery is permanently built into the product
and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing
of the rechargeable battery might cause an explosion or a fire!
Unlike conventional batteries/rechargeable batteries (e.g. AA or
AAA type), the casing of the LiPo rechargeable battery does not
consist of a thin sheet but rather a sensitive plastic film only.
• Never short-circuit the contacts of the rechargeable battery. Do
not throw the battery or the product into fire. There is a danger of
fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not
using the product. Due to the rechargeable battery technology
being used, you do not need to discharge the rechargeable bat-
tery first.
• Never charge the rechargeable battery of the product unattend-
ed.
• When charging, place the product on a surface that is not heat-
sensitive. It is normal that a certain amount of heat is generated
during charging.
Disposal
Electronic devices are recyclable waste and must not be disposed
of in the household waste. At the end of its service life, dispose of
the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the pro-
tection of the environment.
Technical data
Input................................... 5 V/DC, 500 mA via USB
Battery ............................... 3.7 V 1500 mAh LiPo battery
Operating altitude .............. max. 2000 m
Operating conditions .......... 0 to 50 °C, 0 – 85 % RH (non-condensing)
Storage conditions ............. -20 to 60 °C, 0 – 95 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2302125_v1_0920_02_jh_ss_en_(1)

Advertisement

loading

This manual is also suitable for:

23021254064161154176