Rio Salon Laser Manual page 4

S E C U RI TY BU T TON SE QU EN CE
Enter the security button sequence by pressing the buttons (highlighted in black) in the following order:
1 2 3 4
If the sequence is entered correctly the unit will emit 2 beeps and the keyswitch will stop flashing and light green. The lowest
power level will light blue and the x60, x20 and SINGLE buttons will flash blue ready for selection.
Note: The unit will power off if the code is incorrectly entered (the keyswitch will change from flashing green to flashing
orange and the unit will emit two low beeps). Turn the key off, wait a few seconds and then turn the key back on and re-enter
the button sequence.
4 4