Adjusting Colour Enhancement - Brother MFC-5490CN User Manual

Paper and print size
a
Press Menu, 4, 3.
b
Press a or b to choose the paper size
you are using, Letter, A4, 10x15cm or
13x18cm.
Press OK.
c
If you chose Letter or A4, press a or b to
choose the print size you are using,
8 x 10cm, 9 x 13cm, 10 x 15cm,
13 x 18cm , 15 x 20cm or
Max. Size.
Press OK.
Example: Printed Position for A4 paper
1 2
8 x 10cm 9 x 13cm
4 5
13 x 18cm 15 x 20cm
d
Press Stop/Exit.
Printing photos from a memory card or USB Flash memory drive
Adjusting Colour
13
Enhancement
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a
b
c
3
d
10 x 15cm
e
• White Balance
6
Max. Size
• Sharpness
• Colour Density
Press Menu, 4, 4.
Press a or b to choose On or Off.
Press OK.
If you chose Off, then go to step e.
Press a or b to choose 1.Brightness,
2.Contrast, 3.White Balance,
4.Sharpness or 5.Color Density.
Press OK.
Press a or b to adjust the degree of the
setting.
Press OK.
Press Stop/Exit.
Note
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.
13
13
87