Samsung Xpress M202 Series Service Manual page 75

Mono laser printer
Hide thumbs Also See for Xpress M202 Series:
Table of Contents

Advertisement

► Error Code
U2–1112
U2–1113
► Error message
LSU Unit Failure #U2-1112. Turn off then on.
LSU Unit Failure #U2-1113. Turn off then on.
► Symptom
LSU Motor does not work normally.
► Troubleshooting method
1) Check if the LSU harness on the main board is connected properly. (picture- 1)
2) If it is OK, check that the LSU harness on LSU board is connected properly. (picture- 2,3)
3) Check if the LSU harness is defective. (picture- 4,5)
4) If the problem persists, replace the LSU.
5) If the problem persists after replacing LSU, replace the main board.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents