Solutions When The Image Contains Static During Network Projection - Epson PowerLite 107 User Manual

Note: You cannot change the user ID.
• You may need to log in to access some options on the Web Control screen. If you see a log in
window, enter EPSONWEB as the user ID and enter the password set in the projector's Network
menu as the password. The default password is admin.
• To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password
set in the projector's Network menu as the password. The default password is guest.
• Make sure you have access to the network the projector is on.
Note: The user ID and password are case sensitive.

Solutions When the Image Contains Static During Network Projection

If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the
projector. If necessary, change their positions to improve communication. Also make sure that they
are not too far apart; move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
59