Table of Contents
Advertisement
4
Unpacking and Checking the Contents > Checking the Contents > When installing to the saddle finisher
Unpacking and Checking the Contents
Checking the Contents
Open the container box and check that none of the included parts is missing.
■ When installing to the finisher
[11]
[3]
[1]
Punch unit ............................................................................ 1 pc.
[2]
Punched waste paper full sensor unit .................................. 1 pc.
[3]
Punched waste paper box ................................................... 1 pc.
[4]
Punched waste paper box stopper ...................................... 1 pc.
[5]
Screw (Bind, M3 x 6) ........................................................... 1 pc.
[6]*1
Punch unit fixing pin (for finisher) ........................................ 1 pc.
[7]*2
Punch unit fixing pin (for saddle finisher) ............................. 1 pc.
[8]*1
Punch latch unit ................................................................... 1 pc.
4
Unpacking and Checking the Contents > Checking the Contents > When installing to the saddle finisher
■ When installing to the saddle finisher
[8]
[9]
[6]
[1]
[9]
[11]
[10]
[4]
[12]
[3]
[2]
[5]
F-4-3
[9]*1
[10]*3 Screw (TP, M3 x 6) .............................................................. 3 pcs.
[11]
[12]*1 Punch lever caution label..................................................... 1 pc.
*1: These are used only when installing this unit to the finisher.
*2: These are used only when installing this unit to the saddle finisher.
*3: Only two screws are used when installing this unit to the finisher, and three screws are used when
installing this unit to the saddle finisher.
Screw (Bind, M4 x 7) ........................................................... 3 pcs.
Punch jam label ................................................................... 1 pc.
4-3
[7]
[1]
[10]
[10]
[4]
[2]
[5]
F-4-4
4-3
Advertisement
Table of Contents
