Brother HL-6050 User Manual page 23

Make sure that the paper is straight and in the proper position on the MP tray. If it is not, the paper
may not be fed properly, resulting in a skewed printout or a paper jam.
5
While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
When you put paper in the MP tray, please remember the following:
The side to be printed on must be face up.
During printing, the inside tray rises to feed paper into the printer.
Put the leading edge (top of the paper) in first and push it gently into the tray.
The top of the paper stack must be under the maximum paper height guides that are on both
sides of the tray.
6
Send the print data to the printer.
1 - 15 ABOUT THIS PRINTER
Figure 1-16
Figure 1-17