Remote Monitoring; Monitoring The Ied Remotely; Resetting The Ied; Clearing And Acknowledging Via The Local Hmi - ABB Relion SAM600-IO Operation Manual

1MRK 500 131-UEN Rev. C
GUID-11970631-EFA2-429B-B4A6-D7E28DC120B6 V1 EN-US
Figure 31:
7.1.3

Remote monitoring

The IED supports comprehensive remote monitoring.
7.1.3.1

Monitoring the IED remotely

Use the PCM600 tool to operate the IED remotely.
• Analyze disturbance record data.
• Create disturbance records.
• Monitor IED values.
7.2

Resetting the IED

7.2.1

Clearing and acknowledging via the local HMI

Use the Clear button to reset, acknowledge or clear all messages and indications, including LEDs
and latched outputs as well as registers and recordings. Pressing the Clear button activates a view
for selecting the reset function. Events and alarms assigned to alarm LEDs can also be cleared with
the Clear button.
1.
Press
All the items that can be cleared are shown.
Switchgear control unit SAM600-IO
Operation manual
Monitoring events
The event list is not updated dynamically. To update the list, leave the Events menu
and then select it again.
For more information, see PCM600 documentation.
to activate the Clear view.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC13000264-1-en.vsd
Section 7
Operating procedures
GUID-4813E67F-5F17-48A7-A083-27E006A5B386 v1
GUID-D1DA8B48-DA40-4E9D-9593-E699371EBBD7 v7
GUID-9880CE57-79DE-4949-B9FA-1E91ED2F5F4B v5
45