Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Rockwood 31899
- Page 1 Item #31899 1/2" TWIN HAMMER IMPACT AIR WRENCH INSTRUCTIONS...
-
Page 2: Specifications
The ROCKWOOD 1/2” TWIN HAMMER IMPACT AIR WRENCH features a large-capacity six-vane, ball bearing motor with a twin-hammer impact drive. It is fully reversible with 6 forward and reverse torque settings and an infinitely progressive throttled trigger control. CONTENTS (1) 1/2” Impact Gun (1) 1/4”... - Page 3 READ INSTRUCTIONS • Thoroughly read and understand these product instructions before using this tool. Failure to follow all warnings can result in tool damage or serious physical injury. • Keep these product instructions for future reference. EYE INJURY HAZARD! • Tool can eject metal particles, dirt and debris at high velocity. Always wear ANSI approved eye protection when operating this tool.
-
Page 4: Operation
SET-UP • Using a good quality Teflon sealing tape (not included), thread the 1/4” MNPT, Male quick disconnect inlet fitting into the air inlet. CONNECTION • Be sure that the air supply to the tool is clean and dry. Moisture in the supply line will quickly damage the motor and valves. -
Page 5: Maintenance
MAINTENANCE • Add several drops of air tool oil before each use by dropping directly into the air inlet. • If tool is to be unused for an extended period, add 10 drops of air tool oil directly to the air inlet, rotate the tool motor by hand several times to distribute the oil throughout the motor then store the tool, handle up. - Page 6 NOTES Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
-
Page 7: Troubleshooting
TROUBLESHOOTING Insufficient volume of air Verify sufficient air supply to tool. (CFM) to (5 CFM @ 90 PSI minimum requirement). Tool doesn’t operate tool respond to trigger Moisture or depression other contami- Check for moisture in air line and tool air inlet. nation in air supply Insufficient... -
Page 8: Additional Items
ADDITIONAL ITEMS #70491 Eastwood Industrial Air Hose, 3/8” x 25’ #70492 Eastwood Industrial Air Hose, 3/8” x 50’ If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >>...