Table of Contents
Advertisement
Chapter 3. Operation
Select DS0 Number
6 6
Select Port
Use either the scroll method or numbers to enter the
DS0 number (do not mix the use of the keys). Pressing
Enter completes the selection and moves the cursor to
the next field, Passthru. Scroll to change, Y for Yes or
N for No. Press Enter to complete the selection and
move the cursor to the next field, PORT.
Scroll to select the port which is dependent on the
installed option card. Press Enter to complete the
selection and move the cursor to the next field, DS0.
With the cursor on the DS0 field, the DS0 number can be
incremented or decremented by scrolling. If Copy is
pressed, the contents of the last DS0 entered are placed in
the new DS0 number.
When all entries are complete, Cancel moves the cursor
to the last of the submenu choices, 6)APPLY. Either
apply the newly created DS0 map or press Cancel to
return to the DS0 Map A (B) submenu choices.
REVIEW MAP A(B)
Permits a quick review of the number of DS0s assigned
to each port and the number of unassigned DS0s (Idle or
TST) as defined in the currently applied Map A(B).
TSU 600 User Manual
Passthru
Yes or No
CREATE TEMP Selection Screen
Figure 3-16
61200.076L2-1
Advertisement
Table of Contents
