Specifications - Sony MB-806A Operating Instructions Manual

Specifications

Tuner (with WRU-806A or WRU-806B)
Reception type Space diversity
Circuit system Dual conversion superheterodyne
Operating frequency range (MB-806A alone)
758 to 806 MHz
Reception frequencies
Refer to the Operating Instructions
supplied with the WRU-806A or
WRU-806B, respectively.
Local oscillators Crystal controlled PLL synthesizer
Selectivity 60 dB or more (at ±250 kHz
detuned)
Spurious rejection ratio
70 dB or more
Image rejection ratio
60 dB or more
Muting level 30 dBµ
Antenna connectors
BNC-R type (2), 50 ohms
Frequency response
100 to 15,000 Hz ±3 dB
De-emphasis 50 µs
Signal-to-noise ratio
40 dB or more at an A-weighted
RF input level of 20 dBµ
60 dB or more at an A-weighted
RF input level of 60 dBµ
(±5 kHz deviation at 1 kHz
modulation)
Distortion 1% or less (±40 kHz deviation at
1 kHz modulation)
Tone signal frequency
32.768 kHz
Output level
LINE –20 dBm
1 kHz modulation)
MIC –58 dBm (±5 kHz deviation at
1 kHz modulation)
Mix output level
LINE –20 dBm (±5 kHz deviation at
1 kHz modulation)
MIC –58 dBm (±5 kHz deviation at
1 kHz modulation)
Output impedance 150 ohms
Output connectors XLR-3-32 type
........................................................................................................................................................................................
1) 0 dBµ=1 µV
EMF
2) 0 dBm=0.775 Vrms (600 ohms loaded)
1)
2)
(±5 kHz deviation at
General
Power requirements
120 V AC, 60 Hz
Power consumption
30 W
Power supply for antenna boosters
9 V DC (max. 100 mA)
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature
–20°C to +55°C (–4°F to +131°F)
482 × 44 × 300 mm
Dimensions
(19 × 1
Mass Approx. 3.6 kg (7 lb 15oz)(without
tuner units)
Accessories supplied
AC power cord (1)
Antennas (2)
Operating Instructions (1)
Design and specifications are subject to change
without notice.
× 11
3 7
/ / inches) (w/h/d)
4 8
13
(US)